800-221-4603

Keeping Cool When the Heat is On – Chevron Lube Matters

coolant-blog-final

With all the emphasis placed on protecting moving engine parts with lubrication, it might surprise you that a large number of engine failures are caused by problems with the cooling system. Often, those problems are caused by the coolant either becoming contaminated or breaking down.

That’s why it’s important to check your coolant regularly. And by “check your coolant,” we don’t mean just making sure you have enough in the tank. We’re talking about running regular tests twice a year for contamination, deterioration or indicators of other problems in the systems such as rust and corrosion.

Protecting your cooling system means ensuring that the corrosion inhibitor levels in your coolant are adequate. The use of extended life coolants with Organic Additive Technology (OAT), can provide this protection for up to 8 years because of the longevity of the corrosion inhibitor additives. This, in turn, helps prevent corrosion particulates from flowing through the system’s pumps and hoses, which are vulnerable to wear and abrasion.

Twice a year you should test for coolant concentration to be sure you have the right balance between the water, base fluid and corrosion inhibitors. Often you can tell right away if there are problems by the color or clarity. If the coolant sample has turned or is turning brown, it’s a sign of possible rust, corrosion or coolant breakdown. The coolant should be flushed out and replaced. If there is no obvious difference in color, using a refractometer to measure ethylene glycol concentration will yield the most accurate indication of freeze protection.

At these same intervals, you can test for carboxylates (OAT’s), the organic inhibitors that protect metal surfaces from corrosion. You should also test for pH levels or acidity. High acidity is a sign that the coolant is degrading, which increases the risk of corrosive damage.

Although the trend in on-highway vehicles is toward nitrite-free coolants, off-road equipment may still require a coolant with nitrites for added cylinder liner cavitation protection. If you use one of these coolants, you’ll want to check to make sure you have the right concentration of nitrites at the same time you are performing these other tests.

As part of a coolant maintenance program, make sure the tank is always full and not allowing any air into the system, which can cause overheating. And finally, check that the radiator cap is in good condition and able to maintain adequate pressure. If the radiator seal is old or compromised in any way, it can allow evaporation of water, leaving an imbalanced level of water to ethylene glycol in the system. Maintaining the proper cooling system pressure will raise the boiling point of the coolant so it can continue to perform as the engine reaches higher temperatures.

Testing is fairly quick and easy – a small amount of prevention to help avert big problems down the road. The main point with cooling systems is to avoid the all-too-common tendency to “fill it and forget it.” Proper coolant system function is critical to the life of the engine, and it starts with a clean and stable coolant.

– See more at: http://www.chevronlubematters.com/2016/11/14/keeping-cool-when-the-heat-is-on-reduce-the-risk-of-cooling-system-failure/#sthash.EimacdqF.dpuf

Contact Us to request a coolant maintenance kit today!

Ice Road Trucker Lisa Kelly Relies on Delo

Up on the ice roads, you and your truck work together like a team. Watch Lisa Kelly from History® Network’s Ice Road Truckers® as she explains the Alaskan way to get the job done.


Delo_LisaKellyPoster-2016-03-09-06-41-395x500Lisa Kelly, star of the Histroy Channel’s Ice Road Truckers series, has joined Chevron’s “Reality of Delo” campaign, a modern take on testimonials intended to influence heavy duty diesel equipment users about the benefits of Delo heavy duty motor oil (HDMO).

Kelly, a career truck driver, says she is a long time Delo user.

“I have relied on Delo since I began my career in trucking,” she says. “I drive some of the deadliest roads in the world. I can’t take chances on oils. I need to know I’ve got the most durable, reliable and toughest lubricants in my truck. An oil that I can count on to protect my truck even in the harshest conditions. Up on the ice roads, Delo is just what we use.”

– See more at: http://www.ccjdigital.com/ice-road-trucker-lisa-kelly-joins-chevrons-reality-of-delo-campaign/?mkt_tok=eyJpIjoiTVdJek1XSXhOMlZrTlRRdyIsInQiOiJmN3RNUWJ1em1HSTIrWUh0QVVrTnhZYktoWWE5bkhwQ0dYTzFlMHA2TGFCYzZmT1lXR0R0aGFkcnJ4bUVmWmcySnJxK2ZFblk0Ymsya0xzUE85K0l4VXdUWituTko1dGRhR1o1bUllczA4QT0ifQ%3D%3D

Six on Highway Trends That Drive Fuel Savings

Vehicle efficiency changes are now being implemented across the total vehicle today from both truck original equipment manufacturers (OEMs) and fleets to help improve fuel economy and operating costs, while helping to reduce their carbon footprint. Some of the items that are continuously evolving through improved technology and innovation are:

  1. Diesel Engine Optimization
  2. Improved Drivetrain Efficiency
  3. Aerodynamic Changes
  4. Vehicle Weight Reduction
  5. Tires and Automatic Tire Inflation Monitoring
  6. Telematics and Vehicle Automation

 

key areas vehicle efficiency

 

– See more at: Chevron Lube Matters: Total Vehicle Efficiency – Looking Beyond HDMO

 

 

The right coolant can take the heat out of higher costs and downtime

right coolant less downtimeIf you can’t stand the heat . . . maybe you’re not using the right coolant. A major cause of costly downtime and diesel engine problems are related to cooling system failures.

Compounding the issue – today’s engines run hotter. Redesigned over the years to comply with the latest emission regulations, engines now produce higher amounts of heat and are therefore considerably more susceptible to coolant related issues.

Something as simple as using the right coolant could eliminate those added costs, not to mention the downtime for repairs. In many cases, extended life coolants offer improved protection from heat-related engine issues. These coolants do not deplete as rapidly as conventional products or require expensive Supplemental Coolant Additives (SCAs) or pre-charged coolant filters.

What are my coolant choices?

For on- and off-highway use, there are two main types of extended life coolants that can maximize heat transfer and simultaneously protect metal cooling systems. The right choice depends on the application:

  • Nitrite-Free coolants are increasingly the choice for on-highway vehicles. A trend that started in European operations, the use of these coolants is expanding in North American truck engines, where they are providing protection without affecting metal surfaces. A growing number of on-highway vehicle manufacturers have made nitrite-free coolants their factory standard. For fleets wishing to switch and depending on the extended life coolant currently being used, nitrite-free products may be added to cooling systems without the need to flush and fill.
  • Nitrited coolants are most commonly used in off-highway equipment for their proven engine protection properties. These coolants provide enhanced cylinder liner cavitation protection in engines that are susceptible.

Extended life coolants also are available in formulations using propylene glycol (PG) for freeze protection and are most often used in applications where there are environmental concerns. PG is less toxic than ethylene glycol based coolants, but offers the same engine cooling system protection. Water-based inhibited coolants also are available for applications where enhanced heat transfer is required and freezing temperatures are not a concern, mainly in warmer climates and in marine engines.

What to Look For in Coolants

Extended life coolants are often the answer for heavy-duty on- and off-highway diesel engines because they are designed to deliver enhanced cooling system protection at a lower overall cost. When selecting a coolant, you should look for it to be strong in the following three features:

  • Heat transfer characteristics
  • Antifreeze and boil protection
  • Corrosion and cooling system component protection

The bottom line is that it is getting easier to find coolants that provide optimal engine performance, and longer engine life. Using the correct product, along with recommended coolant maintenance practices, can help avoid cooling system problems and failures, their cost and the added impact of downtime.

– See more at: http://www.chevronlubematters.com/2016/02/10/the-right-coolant-can-take-the-heat-out-of-higher-costs-and-downtime/#sthash.kE5NTJ7t.dpuf