800-221-4603

The Value of Oil Analysis

OIL ANALYSIS 1

Analyzing the oil in your vehicle is like sending your blood to the lab for tests. An engine oil analysis can provide clues about the health of your engine – without any invasive surgery.

By analyzing a sample of used engine oil, you can determine the amount of contamination, the wear rates and overall condition of your engine. The real benefit of an oil analysis is that it acts as an early warning system, alerting you to potential problems before they become an equipment failure.

And oil analysis isn’t for just one kind of driver or one kind of vehicle. The tests benefit all engines, from passenger cars to fleet vehicles to agricultural, construction, and industrial equipment.

How to Perform an Analysis

First, you’ll need to purchase an oil analysis kit. Jackson Oil & Solvents have kits which contain everything you need for analysis.

You’ll then extract a small sample of used engine oil from your vehicle and mail this to the lab for testing.

OIL ANALYSIS 2

Interpreting Your Results

All Jackson Oil & Solvents kits are sent to Polaris Laboratories in Indianapolis for analysis.

 Technicians will check for elemental metals, including the presence of metals and other elements, such as aluminum, chromium, iron, copper, lead, calcium and more. Knowing the levels of these materials can help you identify wear patterns in a specific part of the engine. High amounts of wear metal usually indicate an abnormal wear or corrosion problem.

 Technicians will also check for insoluble matter like carbon, fuel and dirt. The insoluble test measures how fast the oil is oxidizing and receiving contaminants, and how effectively the system’s oil filtration is functioning.

OIL ANALYSIS 3

Analysis will measure the oil’s viscosity, its alkalinity or acid level and if the proper level of detergents and anti-wear additives are presents. If your oil falls out of the range it’s supposed to be, the oil could have been overheated or contaminated.

The report will detail the results of these tests and provide an overall condition of the sample, ranging from normal to severe. If you’ve used Polaris Laboratories before, the report will include any changes from earlier analysis.

How Analysis Can Save You Money

The benefits of oil analysis go beyond preventative maintenance.

If you’re considering buying a new or used passenger car, commercial vehicle, or construction equipment an oil analysis can help identify any issues lurking under that washed and waxed hood. You might want to reconsider your purchase if a lab report shows high levels of metal in the oil.

For fleet managers, oil analysis can help minimize downtown, as well as safely extend drain intervals, meaning less money spent on oil, filters and labor.

Make the Most of Your Results

Oil analysis shouldn’t be a one-and-done item on your maintenance checklist. Although a single sample is useful in providing a snapshot evaluation, especially where a component problem is suspected, used oil analysis is best used when results can be compared to many samples taken over a period of time. For all your oil analysis needs or questions, contact Larry Davis at larry.davis@jos.us.com or 317-502-5289.

One thought on “The Value of Oil Analysis

Leave a Reply

Your email address will not be published. Required fields are marked *


 

Fuel Line Archives